Inn-Stall Services Group, Inc. 

Request a Quote

Request a Quote ~

Would you like a no pressure estimate on a new safety fence?

Send us an email with the information below. We will get back to you shortly.
If you prefer to speak with us directly, please call us at 407-365-2400.


                                                       Please provide the following information on your pool area:

 

1. New or existing pool?

2. Do you have a screen enclosure or will you be fencing completely around your pool?

3. What type of deck will the safety fence be installed on (concrete acrylic or brick pavers - thick or thin pavers)?

4. Are there any steps where the safety fence will be installed (for example: A step up to the spa) or is it all one level?

5. Approximately how many feet of safety fence will you need (if we will be installing all the way around your pool, what is the size of your pool)?
6. Where city/town are you located in?
 
7. Please provide your contact information (email address and/or telephone number).


                                                      *   *   *   *   *   *   *   *   *   *   *


                                HOLES ALREADY DRILLED ~ JUST NEED FENCE?

                                    It’s not as easy as it sounds but more than likely we can help. We would need to know:

 


1
. How far apart are your holes spaced (every 30” or 36”)? Our fence is 4' high with 36" spacing between posts and comes in 15' sections. Each section has 6 posts spaced 36” apart.

 

When you measure the holes, you should start at one end of the screen enclosure. There should be 6 holes, each spaced 36" apart. The 7th hole should be right next to the 6th hole. This is where one section ends and another one begins.

 

Starting at the 7th hole, the spacing should again be 36" for the next 6 holes (7th, 8th, 9th, 10th, 11th and 12th holes). The 13th hole will be right next to the 12th and that will start your 3rd section.

 

When you get closer to the other end of the screen enclosure, you probably will not have an even 6 holes spaced 36” apart as this is where your custom cut section will be. It could be just 1, 2, 3, 4 or 5 holes spaced 36" apart. Almost every installation has one custom cut section as very rarely does anyone’s pool area come out to exactly 15’ increments.

 

If you could confirm that your holes are spaced as mentioned above, we will know if our fence will fit as there are some companies that do 30" spacing and some that do 9' sections as well as 12' sections.

 

2. How many feet of fence will you need (if you can take a tape measure and measure from one end to the other, that would be great)?

3. What type of deck?

4. Where are you located (city/county)?

 

I'm sure it sounds confusing so please don't hesitate to call or email if you have questions.

 

                                 

 

                                  HAVE A SAFETY FENCE THAT YOU NEED INSTALLED?

 

  1. How far apart are the posts spaced (every 30” or 36”)?
  2. How many posts per section?
  3. Are all your sections the same size?
  4. Approximately how many feet of safety fence will you need installed (if we will be installing all the way around your pool, what is the size of your pool)?
  5. What type of deck will the fence be installed on (concrete acrylic or pavers. If pavers, are they thick or thin)?
  6. Are there any steps where the safety fence will be installed (for example: A step up to the spa) or is it all one level?
  7. Where are you located (city/county)?

 

CONTACT:

Inn-Stall Services Group, Inc.

A distributor for Life Saver Pool Fence

407-365-2400

info@centralfloridapoolfence.com

Web Hosting Companies